Every bundle the CMS writes — upload, clone, sync, repair and the pet /
effect / figure importers — now lands as `<classname>.hab`, the extension
this deployment's renderer asks for. `.hab` and `.nitro` are the same
container, so an upload of either extension is accepted.
Resolution goes through one module, src/lib/furni/bundle-file.ts, so
nothing has to know the extension twice. Every existence check probes
`.hab` first and falls back to `.nitro`: the on-disk asset set is still
predominantly `.nitro`, and without the fallback Studio would report every
imported item as missing and the cleanup scan would classify 18k live
bundles as fake leftovers. Downloads are unchanged — Habbo's CDN and every
configured clone source still serve `.nitro`, so the conversion happens on
write, not on request.
Deliberately unchanged: the staged-attachment store in furni-attachment.ts
keys on a UUID and never reaches the client, so renaming it would break
in-flight recovery jobs.
Adds scripts/migrate-nitro-to-hab.ts to rename the existing asset set. It
refuses to run without --dry-run or --yes, never overwrites an existing
.hab, never deletes, and is idempotent.
Note: renderer-config.json lives outside this repo and was patched to
.hab separately; that file is served with a 30-day max-age, so returning
clients need a cms-client cache purge to pick the change up.
Importing from a hotel wrote the downloaded .nitro to disk untouched, so
official PNG textures stayed PNG and only SWF imports ended up as WebP.
Every Studio import should produce the same format regardless of where the
bytes came from, so both clone and upload paths now run the bundle through
toWebpLosslessBundle.
The helper decodes the texture and re-encodes it with the same VP8L options
the SWF importer uses, so the artwork round-trips bit-for-bit, and lets
createNitroBundle relabel the member and repair the meta.image pointer. A
bundle that is already lossless WebP is returned untouched, making the
operation idempotent and safe to run on re-import. A colour variant that
shares a library keeps the member base name it arrived with.
A texture that cannot be decoded keeps its original format with a warning
instead of failing the import: the bundle is valid, and losing a furniture
item over a codec edge case is worse than a slightly larger texture.
An uploaded .nitro was written to disk byte-for-byte, so a bundle from a
third-party tool that ships a WebP member while still pointing
spritesheet.meta.image at a .png was accepted and stored as-is. The client
resolves the spritesheet through that pointer, so the result was a file
that validates fine and then renders nothing.
Re-write the bundle through createNitroBundle on import, which labels the
member from the actual bytes and repairs the pointer. No texture is
re-encoded, so the bytes stay identical, and the member keeps the base
name it arrived with so `chair*2` colour variants that share the `chair`
library are not renamed.
Replace raw db.execute tuple casts with queryRows/rowsFrom/execResult/
affectedRows helpers from lib/db, drop redundant mysql2 casts on typed
query builders, and centralize per-test fakeForm into test/fake-form.
Update db mocks in tests so helpers resolve against mocked execute.
Every write path now sets offer_id = catalog_items.id instead of the
sprite id or furnidata offerid: single import insert/update, clone
import, upload import (direct DB + generated SQL migration), catalog
repair inserts, reconcileImportedOfferIds and rebuildCatalogOfferIds.
rebuildCatalogOfferIds is reduced to one bulk UPDATE that repairs any
drift across all rows after every import; 74.838 legacy rows were
repaired on the live database with this change.
Interaction detection:
- Trust SWF-derived sit/lay/stand flags only when the logic XML actually
contains action data (new hasActions metadata); otherwise fall back to
keyword detection so custom furni without <action> nodes are still
classified correctly
- Add French/Dutch/German/Spanish/Italian keywords (chaise, banquette,
stoel, silla, sedia, stuhl, tafel, mesa, ...) to sit/lay/stand detection
with token-boundary matching to avoid false positives like bedside_table
- Unify interaction_modes_count priority: mechanic fixed modes, then raw
animation state count, then sit/lay fallback, then keyword default
- Detect mechanic type even when real flags are not used
Catalog integrity:
- Skip duplicate catalog_items inserts in clone and upload imports
- Re-check live catalog rows before applying generated repair SQL
- Add rebuildCatalogOfferIds() which rebuilds every catalog_items.offer_id
from the local FurnitureData.json (matched by entry id, then classname)
and run it after every import path (single, batch, batch-regen, clone)
- importSingleFurni: actually update an existing item instead of failing on a primary key INSERT collision; refuse to reassign a spriteId owned by a different classname
- reconcileFurniDataWithItemsBase: also sync each entry's offerid to the DB sprite id, not just the id
- Move the full-table interaction_modes_count verification out of the per-item import hot path and run it once per batch/single import
- clone-import: apply the auto-detected interaction_type (was hardcoded 'default'), set FurnitureData offerid and catalog_items.offer_id to the new local sprite id (was the source hotel's id / -1)
- clone batch route: run the same post-import reconcile/verify/ownership/RCON consolidation as the furni batch route
- upload-import: set offer_id to the allocated id in both the direct insert and the generated SQL migration (was -1)
- generateCatalogSql: use the classname as catalog_name and the item id as offer_id so rows match the app-managed import convention
- stats + missing-nitro endpoints: match catalog membership via item_ids instead of the catalog_name join, so translated display names no longer break counts
- deleteImportedItem/rollback: delete catalog rows by the canonical item_ids link only
- classifyFurni: wall items always classify as 'walls' before prefix rules (rare_/val_/xmas_) can misfile them
Replace classname/name keyword guessing with real data so sit/lay/stand
has zero false positives:
- autoDetectInteraction() now accepts real flags (cansiton/canlayon/
canstandon), logicType, and animation-state count; real data wins and
keywords are only a fallback when no real data exists.
- New furni-real-interaction helper reads the local FurnitureData.json
(highest-revision entries win; a true flag in any duplicate is kept)
and falls back to the official Habbo furnidata.
- interaction_modes_count now uses emulator conventions: dice=6,
gate/teleport=2, roller=1, generic multistate = animation-state count,
chairs/beds=1, plain items=0.
- verifyAndFixInteractionModesCount only touches items with real data
and skips everything else (no keyword overwrites).
- parseNitroBundle falls back to gunzip for gzip-compressed .nitro files.
- Wired through furni-import, upload-import, clone-import, and the nitro
editor auto-detect button.
- New auto-interaction.ts: detects canSit/canLay/canStand from classname/name keywords
- Maps keywords to interaction types (bench, chair, bed, table, etc.)
- Returns clickLimit and interactionModesCount for proper click/interaction limits
- Nitro editor: added auto-detect button with preview of detected settings
- furni-import.ts: auto-sets interaction_modes_count during import
- upload-import.ts: auto-detects for direct insert and SQL migrations
- clone-import.ts: auto-detects when cloning from other hotels
- writeSqlMigration now classifies furni via classifyFurni and generates
correct category sub-pages (imp_<catKey>) instead of hardcoded imp_other
- writeSqlMigration generates idempotent INSERT...SELECT WHERE NOT EXISTS
for parent and category catalog_pages, with correct numeric page_id
- writeBadgeToExternalTexts creates ExternalTexts.json (and parent dirs)
when missing instead of failing with ENOENT
Replace the serialized SELECT MAX + INSERT id-allocation chains for
items_base and catalog_items with a lazy-seeded in-process counter so
concurrent clone workers no longer queue on a global lock per item.
Re-seeds after 60s idle to avoid colliding with externally added rows.
Raise the clone import concurrency default from 6 to the batch cap of 10.
- Remove import.meta.dirname from turbopack config (unnecessary filesystem op)
- Add /*turbopackIgnore: true*/ to 3 path.join calls in upload-import.ts
that were missing the comment, causing Turbopack to trace the whole
project unintentionally
- Upload .nitro bundles directly with full DB, catalog, and furnidata integration
- Generate SQL migration files on upload (optional)
- Auto-sync missing furniture from all configured clone sources (SSE batch)
- Repair missing icons by extracting from local .nitro or downloading from sources
- All behind ASSETS_IMPORT permission
openhands
Simo
